Introduction
The construction industry is one of the fastest-growing industries in Germany. The industry employs over 2 million people, making it one of the largest employers in the country. The construction industry is expected to remain a key driver of the German economy in the upcoming years. The construction industry is highly regulated in Germany, with a number of laws and regulations governing the design, construction, and operation of buildings. There are some new trends that are shaping the construction industry in Germany. This industry is embracing digital technologies, such as Building Information Modeling (BIM) and 3D printing. These technologies are helping in online assignment help Germany to improve efficiency, productivity, and quality. The use of 3D printing and the impact of the use of this in the construction industry is going to be discussed in the following section.
Discussion
3D printing in the construction industry in Germany
The implementation of advanced technology has been found to be effective in every industry. Therefore, all industries are evolving fast and adopting technological advancements in order to enhance their performance and achieve sustainable development. The German construction industry has adopted new digital technology such as 3D printing and master thesis help. The interest of the German government in the implementation of 3D printing technology has been increasing year on year. The German government has been showing interest in using 3D printing to build homes, bridges, and other structures. As per the view of Berlak et al. (2021) 3D PHD dissertation writing Germany and printing can be described as a process of creating three-dimensional objects from a digital file. In this method, the object is created by laying down successive layers of material until the object is created. Each of these layers can be seen as a thinly sliced cross-section of the object. The implementation of this technology is helping in receiving an idea of the construction structure and this also improves efficiency, productivity, and quality of the workers. According to the view of Hossain et al. (2020) 3D printing is the method that helps in building the prototype easily and in a very fast manner. 3D printing is being used to build prototypes of buildings and other structures in Germany. This helps to reduce the cost and time of bringing new products to market. This can efficiently increase the product development process. As 3D printing can be used to create complex objects, therefore, this can be easily used in the formation of difficult structures in the construction industry which is impossible to create using traditional manufacturing methods. In addition to this, Chaudhuri et al. (2019) has mentioned that 3D printing is a sustainable technology, as it produces less waste than traditional manufacturing methods.
The construction industry has been receiving full support from the German government in the development of 3D printing for construction. In 2017, the government launched the 3D Printing for Construction Initiative, which aims to promote the use of 3D printing in the construction industry. According to the view of OZTURK, (2018) the use of 3D printing in the German construction industry can be described as in its preliminary stage. However, more research has been continuing and the technology has the potential to revolutionize the industry and make construction more efficient, cost-effective, and sustainable. On the other hand, Shakor et al. (2019) has mentioned that the use of new technology such as 3D printers is still relatively expensive. However, from the research, it has been assumed that the cost of 3D printing will decrease as the technology matures. In addition to this, with the newly introduced technology, this has been found that there is a scarcity of raw materials. Lack of resources is limiting the growth of this technology and the technology has not been getting focused on a commercial basis. In Germany, the construction industry is highly regulated by governmental norms and regulations. There are a number of laws and regulations that need to be considered before 3D printing can be used to build structures. The involvement of government laws has been complicated the preliminary stages of the implementation of 3D printing technology in the construction industry. Despite all these challenges, 3D printing technology has great potential in the construction industry and this is thought to be significant for the growth of the construction industry (Lowke et al.2020). 3D printing can help to reduce costs, increase efficiency, improve quality, and make construction more sustainable. With the increasing popularity of the technology, it can be assumed that the cost of 3D printers will decrease, and it is likely that 3D printing will become more widely adopted in the construction industry.
Impact of the Use of 3D Printing in the German construction industry
3D printing has been proven to be beneficial for the construction industry from different corners. However, the technology is in its preliminary stage but it is benefiting the industry persons and the government. Therefore discussion on the impact of 3D printing is essential. The major benefit that has been observed by the people is a reduction in the overall cost of the construction industry. 3D printing can help reduce construction costs by eliminating the need for traditional materials and labor. For example, this can be mentioned that a 3D-printed home can use up to 50% less concrete than a traditional home (Markin et al. 2021). The advanced technology has been reducing the dependency on the labours and also reducing the traditional material. Therefore, this is ultimately reducing the overall cost of the construction procedure. In addition to this, due to less dependency on the labours, the issues involved with labour management, and the communication gap can be resolved. The completion of the projects can be done on time which increases the ultimate scope of the construction projects and brings more future opportunities. As per the view of Osunsanmi et al. (2018) 3D printing can help to increase the efficiency of construction by reducing the amount of time it takes to build a structure. With the implementation of this technology, a 3D-printed bridge can be built in a fraction of the time it takes to build a traditional bridge. The traditional methods are more time-consuming and also involve thousands of stakeholders. Through the use of this technology, the dependency can be reduced. In addition to this, the use of this technology is also beneficial as 3D printing helps in improving the quality of construction by creating more durable structures. Along with this, this technology also helps in creating energy-efficient buildings which are sustainable and reduce the environmental impacts of the new constructions. According to the findings of Mechtcherine et al. (2019) this can be mentioned that the, 3D-printed homes are designed in such a way that they can withstand earthquakes and other natural disasters. Surviving natural disasters is a very rare technology in the Construction Industry and therefore the government of Germany has accepted the technology and provided more opportunities for the technology to grow. An interesting fact of this technology is that the raw materials have been formed from recycled materials. Therefore, through the use of this technology more unused products can be recycled effectively and waste generation can be reduced. As paper the view of Avrutis et al. (2019) a 3D-printed home can be created out of recycled concrete and plastic. The use of previously used materials effectively reduces waste generation. Therefore, this technology is beneficial for reducing environmental waste and recycling promotes sustainability in the construction industry. In the future, this is the ultimate way to construct sustainably and reduce environmental waste. With time this technology will be reducing the overall cost of construction and ultimately the construction industry will get benefited from the use of this technology.
Conclusion
This can be concluded that 3D printing technology has recently arrived in the market of the German construction industry and the German government has accepted the technology for developing the advanced constructions. This technology is beneficial in the current and future situations in order to reduce environmental impact. The technology is sustainable as the previously used materials can be used in this process. The 3D printing technology is therefore effective in reducing environmental impact and increasing the sustainability of the construction industry. Along with this, the technology is also effective in reducing the overall cost of the construction process. Further, this method also increases the strength of the buildings which helps in increasing durability and also helps in reducing the chance of accidents from collapsing. The strength and durability provided by the technology is beneficial for the construction industry. In addition to this 3D printing can help to increase the efficiency of construction by reducing the amount of time it takes to build a structure. This increases the efficiency of the construction industry and will increase the scope of this industry by providing the projects on time. Hence this technology is time-saving, cost-saving, and sustainable, and at the same time, this also increases the strength of the construction therefore widely accepted by the construction industry in Germany.
References
Avrutis, D., Nazari, A. and Sanjayan, J.G., 2019. Industrial adoption of 3D concrete printing in the Australian market: potentials and challenges. 3D concrete printing technology, pp.389-409.’
Berlak, J., Hafner, S. and Kuppelwieser, V.G., 2021. Digitalization’s impacts on productivity: A model-based approach and evaluation in Germany’s building construction industry. Production Planning & Control, 32(4), pp.335-345.
Chaudhuri, A., Rogers, H., Soberg, P. and Pawar, K.S., 2019. The role of service providers in 3D printing adoption. Industrial Management & Data Systems.
Hossain, M.A., Zhumabekova, A., Paul, S.C. and Kim, J.R., 2020. A review of 3D printing in construction and its impact on the labor market. Sustainability, 12(20), p.8492.
Lowke, D., Talke, D., Dressler, I., Weger, D., Gehlen, C., Ostertag, C. and Rael, R., 2020. Particle bed 3D printing by selective cement activation–Applications, material and process technology. Cement and Concrete Research, 134, p.106077.
Markin, V., Krause, M., Otto, J., Schröfl, C. and Mechtcherine, V., 2021. 3D-printing with foam concrete: From material design and testing to application and sustainability. Journal of Building Engineering, 43, p.102870.
Mechtcherine, V., Nerella, V.N., Will, F., Näther, M., Otto, J. and Krause, M., 2019. Large-scale digital concrete construction–CONPrint3D concept for on-site, monolithic 3D-printing. Automation in construction, 107, p.102933.
Osunsanmi, T.O., Aigbavboa, C. and Oke, A., 2018. Construction 4.0: the future of the construction industry in South Africa. International Journal of Civil and Environmental Engineering, 12(3), pp.206-212.
OZTURK, G.B., 2018. The future of 3D printing technology in the construction industry: a systematic literature review. Eurasian Journal of Civil Engineering and Architecture, 2(2), pp.10-24.
Shakor, P., Nejadi, S., Paul, G. and Malek, S., 2019. Review of emerging additive manufacturing technologies in 3D printing of cementitious materials in the construction industry. Frontiers in Built Environment, 4, p.85.